Importers and distributors in India of opthalmic equipments and accessories, surgical instruments, refraction equipments, O.T. equipments and all equipments for the surgical industry and medical professional.
 



 

HYDRAULIC CYLINDERS

Bore Sizes :

40 mm to 800 mm
Strokes :

Upto 6000 mm
Pressure :

Upto 400 bar
   
Precision honed high strength steel tube.
High yield strength induction-hardened, super finished, hard-chrome plated piston rod for maximum protection against wears.
Self energising seals for the piston and piston rod get automatically adjusted to varying pressures.
Cushions provided where deceleration of piston movement required
Available with different  mounting arrangements in a variety of constructions such as tie-rod, mill-duty,  threaded-gland, welded flange and telescopic type. And also as per IS 11003/ISO-6020/IS0-6022.
   
HEAVY DUTY AIR CYLINDERS
Bore Sizes :

40 mm to 500 mm
Strokes :

Upto 6000 mm
Pressure :

17 kg./ cm2
   

Precision honed high-strength steel tube duly hard-chrome plated for corrosion resistance.
High yield strength, super finished and hard-chrome plated piston rod.
Precision machined solid steel head and cap for true alignments.

Self  energising seals for the piston and piston rod.

Available in sixteen different standard mounting models or custom built tospecifications. Also as per IS 10143
   
STANDARD DUTY INDUSTRIAL AIR CYLINDERS
Bore Sizes :

32 mm to 100 mm
Strokes :

Upto 500 mm
Pressure :

10 kg./ cm2 max
   

Fine finished, non-corrosive profiled aluminium tube.
Hard chrome plated, high-strength piston rod for maximum wear-resistance.
Specially designed light alloy pressure die cast head and cap.

Fully  vulcanized,, single-piece piston for minimising leakage.

Provision of splines in the end - plates facilitates incorporating the rod bushat the port, thus reducing the overall length of the cylinder.

Adjustable cushioning whenever required.
Available in six  different  mounting models.
   
PNEUMATIC ROTARY ACTUATORS
Models: :

# 2750 & # 9602750 developing  32 kg. mts @ 7 kg/ cm2
960  developing  11.5 kg. mts @ 7 kg/ cm2

Port Size :

1/4 " BSP
Actuation :

90°
   

Double-acting.
Duraluminium alloy construction combines lightness and high-strength.

Twin-rack pistons drive pinion without deflection and with minimum tooth loads. Additional guide-sleeves are provided for stability of rotation and to prevent piston thrust on body- rnember.

Ingenious air distribution through guide - sleeves to cater both ends of twin-pistons.

Totally enclosed, sealed compact units.
   
AIR PREPARATION UNITS
Port Sizes :

1/8 " BSP to 11/4” BSP
   
Provides clean, filtered and moisture free regulated and lubricated air toDown -line equipment
   
FILTER
Corrosion-resistant construction. Shatter - proof polycarbonate bowl.
5/25/40 microns filter element rating. Auto drain & Metal Bowl  (optional).
   
REGULATOR
Balanced piston design for sensitive control.
SeIf -relieving of secondary  pressure.
Low - torque finger -tip control.
 Threading on bonnet for panel mounting.
Corrosion-resistant construction.
   
LUBRICATOR
Corrosion-resistant construction.
Shatter - proof polycarbonate bowl.
Drip-rate clearly visible through sight-tube. .Capacity valve ensures oil-delivery proportional to air-flow.
   
MODULAR AIR VALVES
Port Sizes :

1/8" to 1/2" BSP (41= 314/41= 514)

1/" to 11/" BSP (41= 310)
Pressure :

Upto 10 kg/cm2
Models 314 and 514  :

Stainless steel spool moves on thin film of air with micronic clearance. No wearing contact, no seals to wear and low shifting forces.Quick response and high cycle rates. Extremely long service life with littlemaintenance. Ideal for use on high speed machines and In food processing machinery.
Model 310 : Power valve with unique advantages.
Operators : Pilot, Palm-button, hand-Iever, Foot-pedal, Camlever, Sequence, Single and Double Solenoid.
Options : 2-way, 3-way and 4-way.
   
Low-cost, mass-produced valve modules with sub-base mounting, to reduce downtime and facilitate easy servicing.
   
RESILIENT SEAL SPOOL TYPE AIR VALVES
Model :

534
Port Sizes :

1/4”,3/8” and ½” BSP
Pressure :

Upto 10 kg/cm2
Operators :

Pilot, Single and Double Solenoid and Hand Lever
Options : 3-way and 4-way
   
Virtually zero leakage with easy to replace seals.
Valve Features in-built Flow Control Arrangement.
Mounting Interface Dimensions conform to ISO-5599-1.
   
ROTARY AIR VALVES
Port Sizes :

1/4 " to 1" BSP
Pressure :

Upto 10 kg./cm2
   
Four-way, three  position valve, designed with duraluminium pressure die-cast body.
Easy panel mounting or in-Iine mounting.
Low cost and light  weight.
Detented three-position mechanism provides stable positioning.
   
HEAVY DUTY LINER SLIDE VALVE
Model :

434
Port Sizes :

1/2" to 1" BSP
Pressure :

2 to 10 kg/Cm. Sq
Operators :

Pilot, Solenoid & Hand Lever
Options : 3-way or 4-way; 2-position or 3-position
   
The Linear Slide valve incorporates simple design with minimum parts for reliable operation and low maintenance. A spool having pistons with seals moves a stainless steel slide with low friction PTFE base over a lapped port plate connecting ports in sequence. The sealing efficiency is independent of spool seals.
   
AUXILLARY AIR VALVES
Port Sizes :

1/8 " to 1" BSP
Pressure :

Upto 10 kg/cm. sq.
   
Flow control (with return free flow), Quick exhaust, Shuttle and Non-return valves and Speed control mufflers
   
LINER AIR MOTORS
Pre-piped power package consisting of:
Air cylinder.
Directional  control air valve.
Speed  control  valves.
Air noise mufflers .
Piping and fittings.
Easier to order, less expensive to install and more economical to operate.
   
PNEUMATIC CONTROL SYSTEMS
Custom-built featuring the following advantages
Open type panels or closed type control cabinets.
Dust and vermin- proof construction for cabinets.
Fabricated out of heavy gauge steel sheets upto 3 mm thickness.
Compact design and  layout to facilitate easy servicing of all internal components.
Eliminates cumbersome assembly and piping at site and results in short project times and cost-effectiveness.